Emergency lighting 4 watt surface-mounted emergency light fixture

The OTG-DD-3 emergency light fixture is equipped with 16 LEDs. The fixture can be set to continuous (permanent lighting) or emergency lighting (non-permanent or non-continuous emergency lighting). If the fixture is set to continuous, the light will remain on all the time.

This 4-watt fixture is a quality product and a favorite among installers and security companies. The fixture has 16 LEDs and a test button, allowing you to manually check if the battery is working. The fixture comes with 4 pictograms indicating the following directions: left, right, up, and down. You can apply the pictogram that best suits your location.

Installation

The LED emergency light can be mounted above doors, windows, and on walls. In consultation with a specialist, you can determine how many locations require emergency lighting and how it should be installed.

Continuous or non-continuous

The fixture can be set to continuous (permanent lighting) or non-continuous (non-permanent lighting). If the fixture is set to continuous, the light will stay on even when there is no power outage. 

If you set the fixture to non-continuous, the light will only turn on when the fixture no longer receives power from the grid and will then remain on for 3 hours on the battery. Three hours is usually enough for employees and visitors to leave a building and also meets legal standards.

CE-certified

All our emergency lighting models are CE-certified and meet the standards and requirements applicable in Europe. The housing and diffuser are made of high-quality plastic.

• Watt: 4 watts
  
• Dimensions: 352 x 110 x 61 mm (LxWxH)
  
• Rated voltage: 220-240V AC, 50/60Hz
  
• Lamp type: 16 LEDs
  
• Color temperature: 6000K (cool white)
  
• Protection class: IP65
  
• Luminous flux: 170lm / 160lm (AC/DC)
  
• Battery: Ni-Cd 3.6V 900mAh (decentralized)
  
• Autonomy: (emergency mode) more than 3 hours
  
• Charging time: 24 hours (first charge 36 hours)
  
• LED lifespan: 40,000 hours