Emergency lighting 3 watt surface-mounted with a frosted white cover

The OTG-KL emergency lighting series with a frosted white cover is one of the best-selling emergency lights due to its low price but still very high quality. The fixtures are equipped with 16 LED lamps. They come with four pictograms with the following arrow directions: left, right, up, and down. You can apply the appropriate pictogram to the fixture that suits your installation. The fixtures have a frosted white cover. All fixtures are equipped with a test button so that you can manually check if the battery is working.

There is a variant of this fixture with 3 watts and a frosted white cover:

OTG-KL-3 in the color temperature 4000K (neutral white) with a standard Ni-Cd battery (1500mAh).

The LED emergency light can be mounted above doors, windows, and on walls. In consultation with a specialist, you can determine how many locations require emergency lighting and how it can be installed. On the back and four sides of the fixture, circles are marked for drilling. 

After drilling a hole, you can connect the cable to the screw terminal attached to the circuit board. This way, you connect the fixture to the power grid (230V). To make the hole resistant to water damage, you can install a PG9 strain relief in the drilled hole through which you then pull the cable. This protects the fixture from water damage, and the strain relief ensures that the cable cannot disconnect from the terminal.

The fixture can be set to continuous (permanent lighting) or non-continuous (non-permanent lighting). If the fixture is set to continuous, the light will remain on even when there is no power outage. If you set the fixture to non-continuous, the light will only turn on when the fixture no longer receives power from the grid and will then stay on for three hours on the battery.

Three hours are usually enough for employees and visitors to leave the building, and it also meets the legal standards.

All our emergency lighting models are CE-marked and comply with the standards and requirements applicable in Europe. The housing and diffuser are made of high-quality plastic.

Specifications

• EAN code: 6011421747744 
• Watt: 3 watts 
• Dimensions: 35.2 x 11 x 6.1 cm 
• Nominal voltage: 220-240V AC, 50/60Hz 
• Lamp type: 16 LED lamps 
• Color temperature: 4000K (neutral white) 
• Protection class: IP65 
• Luminous flux: 160lm / 150lm (AC/DC) 
• Battery: LiFePO4 3.2V 1500mAh 
• Autonomy (emergency time): more than 3 hours Charging time: 24 hours (first charge 36 hours) 
• LED lifespan: 40,000 hours 
• Accessories: including 4 pictograms 
• Continuous operation: adjustable to continuous and non-continuous 
• Mounting method: ceiling or wall 
• Mounting type: surface-mounted 
• Housing material: polycarbonate